SlicKnives is proud to collaborate with CATELLIERmade!

Check out our EDC Folder Roll that's perfect for organizing and protecting your folding knives and EDC tools. This knife roll has eighteen 2.25" wide pockets, two 3" wide pockets, and is designed to carry a variety of pocket knives and EDC tools up to 12" long with offset pockets.

Expertly handcrafted start to finish by Ryan at CATELLIERmade right here in Castle Rock, CO, it's crafted from tough Charcoal Gray #10 (14.7oz) Duck Martexin Original Wax "Plain Weave" fabric from New Jersey. After finishing, this 100% waxed cotton canvas comes in at a robust ~19.84 oz/yd that will handle heavy use providing years of service.

Please note: while the color is quite consistent, the markings and surface of the waxed cotton will be unique to your piece and will patina based on your use. It looks great out of the gate and gets even better with age! The items shown in the second picture are for illustration purposes and are not included.

Be sure to check out CATELLIERmade's website and follow them on Instagram or Facebook!

SlicKnives is proud to collaborate with CATELLIERmade!

Check out our EDC Folder Roll that's perfect for organizing and protecting your folding knives and EDC tools. This knife roll has eighteen 2.25" wide pockets, two 3" wide pockets, and is designed to carry a variety of pocket knives and EDC tools up to 12" long with offset pockets.

Expertly handcrafted start to finish by Ryan at CATELLIERmade right here in Castle Rock, CO, it's crafted from tough OD Green #10 (14.7oz) Duck Martexin Original Wax "Plain Weave" fabric from New Jersey. After finishing, this 100% waxed cotton canvas comes in at a robust ~19.84 oz/yd that will handle heavy use providing years of service.

Please note: while the color is quite consistent, the markings and surface of the waxed cotton will be unique to your piece and will patina based on your use. It looks great out of the gate and gets even better with age! The items shown in the second picture are for illustration purposes and are not included.

Be sure to check out CATELLIERmade's website and follow them on Instagram or Facebook!

SlicKnives is proud of our collaboration with Hoosier Hank Company!

Check out our EDC Handkerchief, measuring 6x8 inches - ideal for slipping into your pocket or purse. This is not your typical handkerchief. Meticulously crafted, it features proprietary camo on one side and olive drab green microsuede on the other side. This unique combination ensures a versatile and gentle handkerchief for everyday use, effectively cleaning your delicate and valuable items without causing any scratches. Perfect for cleaning your phone screen, watch screen/face, glasses, and so much more. 

Each of Hoosier Hank Company's handkerchiefs is handcrafted with a touch of love exclusively for you. Their commitment to quality takes precedence in the creation of their products. Rest assured, your handkerchief is built to endure daily usage, promising both functionality and longevity.

Be sure to check out Hoosier Hank Company's website and Instagram Profile!

SlicKnives is proud of our collaboration with Hoosier Hank Company!

Check out our Square EDC Handkerchief, measuring 7x7 inches - ideal for slipping into your pocket or purse. This is not your typical handkerchief. Meticulously crafted, it features a blend of 100% cotton on the sage green plaid side and the black SlicKnives logo on the other side. This unique combination ensures a versatile and gentle handkerchief for everyday use, effectively cleaning your delicate and valuable items without causing any scratches. Perfect for cleaning your phone screen, watch screen/face, glasses, and so much more. 

Each of Hoosier Hank Company's handkerchiefs is handcrafted with a touch of love exclusively for you. Their commitment to quality takes precedence in the creation of their products. Rest assured, your handkerchief is built to endure daily usage, promising both functionality and longevity.

Be sure to check out Hoosier Hank Company's website and Instagram Profile!

SlicKnives is proud to collaborate with CATELLIERmade!

Check out our EDC Minimalist Wallet, built to carry 3-6 cards and measures 2.75x4 inches - it's intentionally slim for easy carry in your pocket, bag, or purse.

Expertly handcrafted start to finish by Ryan at CATELLIERmade right here in Castle Rock, CO, it's made of supple 3-4oz black Horween Chromexcel leather and tough matching brown stitching that stands up to years of use. Chromexcel is characterized by a rich pull-up in its full aniline, hand rubbed oil finish that only looks better when your personalized patina is applied though everyday carry.

Please note: while the color is quite consistent, the surface of the leather will be unique to your piece and will patina based on your use. It looks great out of the gate and gets even better with age! The cards and items shown in the second picture are not included.

Be sure to check out CATELLIERmade's website and follow them on Instagram or Facebook!

SlicKnives is proud to collaborate with CATELLIERmade!

Check out our EDC Minimalist Wallet, built to carry 3-6 cards and measures 2.75x4 inches - it's intentionally slim for easy carry in your pocket, bag, or purse.

Expertly handcrafted start to finish by Ryan at CATELLIERmade right here in Castle Rock, CO, it's made of supple 3-4oz brown Horween Chromexcel leather and tough matching brown stitching that stands up to years of use. Chromexcel is characterized by a rich pull-up in its full aniline, hand rubbed oil finish that only looks better when your personalized patina is applied though everyday carry.

Please note: while the color is quite consistent, the surface of the leather will be unique to your piece and will patina based on your use. It looks great out of the gate and gets even better with age! The cards and items shown in the second picture are not included.

Be sure to check out CATELLIERmade's website and follow them on Instagram or Facebook!

SlicKnives is proud to collaborate with CATELLIERmade!

Check out our leather Valet Tray, built to catch your EDC items, measures 6x6 inches inside, and has a footprint of about 7.5x7.5 inches.

Expertly handcrafted start to finish by Ryan at CATELLIERmade right here in Castle Rock, CO, it's made of supple 3-4oz black Horween Chromexcel leather with strong matte black snaps that can be undone for packing it flat - makes it a perfect travel companion. Chromexcel is characterized by a rich pull-up in its full aniline, hand rubbed oil finish that only looks better when your personalized patina is applied every time you toss your EDC items into at the end of the day.

Please note: while the color is quite consistent, the surface of the leather will be unique to your piece and will patina based on your use. It looks great out of the gate and gets even better with age! The EDC items shown in the second picture are not included.

Be sure to check out CATELLIERmade's website and follow them on Instagram or Facebook!

SlicKnives is proud to collaborate with CATELLIERmade!

Check out our leather Valet Tray, built to catch your EDC items, measures 6x6 inches inside, and has a footprint of about 7.5x7.5 inches.

Expertly handcrafted start to finish by Ryan at CATELLIERmade right here in Castle Rock, CO, it's made of supple 3-4oz brown Horween Chromexcel leather with strong matte black snaps that can be undone for packing it flat - makes it a perfect travel companion. Chromexcel is characterized by a rich pull-up in its full aniline, hand rubbed oil finish that only looks better when your personalized patina is applied every time you toss your EDC items into at the end of the day.

Please note: while the color is quite consistent, the surface of the leather will be unique to your piece and will patina based on your use. It looks great out of the gate and gets even better with age! The EDC items shown in the second picture are not included.

Be sure to check out CATELLIERmade's website and follow them on Instagram or Facebook!

EDC _3.5 Key Features:

• Tough 3.5" folding & highly corrosion resistant Kephart profile manual flipper
• Blade made from Japanese AUS-10 stainless steel
• Slicey distressed tumbled stonewashed drop point high flat ground blade with finger choil for finer tasks
• Ceramic ball bearing pivot with flipping tab & ceramic detent for quick manual opening
• Large grip with easy-to-swap black G10 scales, stainless steel liners with liner lock & lanyard hole
  
• Tough 4-position pocket clip for ambidextrous carry options 

Due to our fondness of Horace Kephart’s versatile drop point blade design, SlicKnives created folding versions of the blade design in our FlicKnives series, so that we all can carry one every day.  While not made for batoning wood, our spear point folders are built tough and are slicey to help you get your work done. 

SlicKnives has designed our FlicKnives series in the U.S. and have them made from distressed tumbled stonewashed AUS10 stainless steel by our expert knife making partners in Taiwan.  The EDC _3.5 ^TM includes a smooth manual flipping 3.5” drop point blade and ceramic ball bearing pivot, a solid liner lock with ceramic detent, and a full comfortable grip with a strong 4-position stonewashed pocket clip that will make it your go-to large EDC knife. 

The EDC _3.5 comes super-sharp out of the box with a full flat grind and a secondary beveled edge for strength, ease of sharpening, and years of service.  We’ve included jimping along the spine of the liners under your thumb to improve handling of tough jobs and along the liner lock release for easy one-hand closing.  To allow for choking up on the EDC _3.5 for finer tasks, we’ve included a finger choil for proper handling.  And since it’s made with quality stainless steel, you won’t need to worry about the edge or blade corroding at the end of the day.

Black G10 scales have been chosen to provide a tough, long-lasting grip that holds up over a day’s work, even when it gets wet.  The ergonomic grip is mounted to the EDC _3.5 with screws for durability and includes a hole that’s ready for a safety cord or brightly colored length of paracord for improved visibility if you so choose.  Adding an EDC _3.5 to your EDC items will prove to be one of the wisest long-term choices that you can make.

And if you don’t care for the included black scales, check out our easy-to-change options in a variety of colors, so that you can customize the EDC _3.5 to your liking!

If you don’t care for a flipper or finger choil but want the same drop point blade, check out our FlicKnives Pocket _3.5 model that includes a thumb stub as an alternative!

EDC _3.5 Specifications:

Blade Length: 3.5" (8.9 cm)

Blade Action: Manual flipper with ceramic ball bearing pivot, ceramic detent, and liner lock

Closed Length: 5" (12.7 cm)

Overall Length: 8.5" (21.6 cm)

Blade Material: Japanese AUS10 Stainless Steel

Blade Thickness: 0.13" (3.3 mm)

Blade Hardness: 58-60

Blade Style: Drop Point with finger choil

Blade Grind: High flat ground blade

Blade Finish: Distressed Tumbled Stonewashed

Pocket Clip: Ambidextrous 4-position Stonewashed stainless steel

Handle Material: Easy-to-swap Black G10

Liners: Stainless steel

Knife Weight: 4.6 Oz. (130 g)

Packaged Weight: 5 Oz. (142 g)

SKU: FK3.5KFEBLK

UPC: 850066675083

Made in Taiwan

CA Prop 65 Warning: Cancer and Reproductive Harm - www.P65warnings.ca.gov

There are numerous reviews of the EDC 3.5 on YouTube showing this blade - here are a couple to get you started:

Joe over at The Steel Mindset shows the EDC 3.5 working and touches on the Homesteader 3.5 in this FlicKnives showcase on his Channel:

SCAB @ImScabyourenot Choirboyz Cutlery Outdoors @ImScabyourenot has carried the EDC 3.5 for some time and here's his hard use review:

EDC Tool _2.5 Key Features:

• Stonewashed stainless steel keychain tool
• Carry on a keyring or lanyard
• Bottle opener with jimping for added grip
• Flat screwdriver prybar to save your knife tip
• 1/4" hex bit hole - hex bits not included

The SlicKnives EDC plan includes having a keychain or lanyard tool that is set up to quickly handle tasks ensuring that we have a proper prying tool handy.  We always carry a separate tool, so that we’re not tempted to use our knife blades on tasks for which they’re not designed.

SlicKnives has designed our FlicKnives EDC Tool _2.5 ^TM in the U.S. and have them made from tough, quality stonewashed stainless steel by our expert tool making partners based in Taiwan.  The EDC Tool _2.5 comes ready to handle most quick prying tasks with a beveled tip that doubles as a flat screwdriver and helps to save your knife’s edge when you need to open a box.

We’ve included jimping along the edge opposite of the bottle opener for those times when slippery emergencies present themselves after digging through the cooler for just the right beverage.  And we’ve included a ¼” hex bit hole, so that you can choose and carry the proper hex bits to address quick tightening of the screws that impact your daily life.  Hex bits are not included.

Adding an EDC Tool _2.5 to your keychain or lanyard will prove to be one of your best EDC choices ever!

Specifications:

Material: Stainless Steel

Finish: Stonewashed

Length: 2.5" (6.35 cm)

Thickness: 0.12" (3 mm)

Weight: 0.6 Oz. (17 g)

SKU: FKEDCT2.5

UPC: 850066675076

Made in Taiwan

Homesteader _3.5 Key Features:

• Tough 3.5" folding & highly corrosion resistant manual flipper
• Blade made from Japanese AUS-10 stainless steel
• Slicey distressed tumbled stonewashed modified sheepsfoot high flat ground blade with finger choil for finer tasks
• Ceramic ball bearing pivot with flipping tab & ceramic detent for quick manual opening
• Large grip with easy-to-swap black G10 scales, stainless steel liners with liner lock & lanyard hole
  
• Tough 4-position pocket clip for ambidextrous carry options 

SlicKnives absolutely loves basic, single blade designs that everyday people can safely rely upon to get their work done, so that they can relax at the end of the day.  If you need a slicey and hard-working locking blade, our FlicKnives series of folding knives are just for you.

SlicKnives has designed our FlicKnives series in the U.S. and have them made from distressed tumbled stonewashed AUS10 stainless steel by our expert knife making partners in Taiwan.  The Homesteader _3.5 ^TM includes a smooth manual flipping 3.5” modified sheepsfoot blade and ceramic ball bearing pivot, a solid liner lock with ceramic detent, and a full comfortable grip with a strong 4-position stonewashed pocket clip that will make it your go-to large EDC knife. 

The Homesteader _3.5 is less pokey than other blade profiles and comes super-sharp out of the box with a full flat grind and a secondary beveled edge for strength, ease of sharpening, and years of service.  We’ve included jimping along the spine of the liners under your thumb to improve handling of tough jobs and along the liner lock release for easy one-hand closing.  To allow for choking up on the Homesteader _3.5 for finer tasks, we’ve included a finger choil for proper handling.  And since it’s made with quality stainless steel, you won’t need to worry about the edge or blade corroding at the end of the day.

Black G10 scales have been chosen to provide a tough, long-lasting grip that holds up over a day’s work, even when it gets wet.  The ergonomic grip is mounted to the Homesteader _3.5 with screws for durability and includes a hole that’s ready for a safety cord or brightly colored length of paracord for improved visibility if you so choose.  Adding a Homesteader _3.5 to your EDC items will prove to be one of the wisest long-term choices that you can make.

And if you don’t care for the included black scales or need something more visible, check out our easy-to-change options in a variety of colors, so that you can customize the Homesteader _3.5 to your liking!

If you don’t care for a flipper or finger choil but want the same powerful modified sheepsfoot blade, check out our SlipjointKnives Model Two _3.5 as an alternative!

Homesteader _3.5 Specifications:

Blade Length: 3.5" (8.9 cm)

Blade Action: Manual flipper with ceramic ball bearing pivot, ceramic detent, and liner lock

Closed Length: 5" (12.7 cm)

Overall Length: 8.5" (21.6 cm)

Blade Material: Japanese AUS10 Stainless Steel

Blade Thickness: 0.13" (3.3 mm)

Blade Hardness: 58-60

Blade Style: Modified Sheepsfoot with finger choil

Blade Grind: High flat ground blade

Blade Finish: Distressed Tumbled Stonewashed

Pocket Clip: Ambidextrous 4-position Stonewashed stainless steel

Handle Material: Easy-to-swap Black G10

Liners: Stainless steel

Knife Weight: 4.6 Oz. (130 g)

Packaged Weight: 5 Oz. (142 g)

SKU: FK3.5SHFHBLK

UPC: 850066675090

Made in Taiwan

CA Prop 65 Warning: Cancer and Reproductive Harm - www.P65warnings.ca.gov

There are numerous reviews of the Homesteader 3.5 on YouTube showing this blade work - here's one to get you started:

Check out SCAB's hard use review on his Channel, @ImScabyourenot Choirboyz Cutlery Outdoors:

Pocket _3.5 Key Features:

• Tough 3.5" folding Kephart blade profile made from Japanese AUS-10 stainless steel
  
• Slicey high flat ground drop point blade with sharpening choil that has a distressed and tumbled stonewash finish to help tough use blend right in
• Bronze washer pivot with thumb stud & ceramic detent for smooth manual opening helping to make this entire knife highly corrosion resistant
• Large grip with easy-to-swap black G10 scales supported by stainless steel liners with liner lock
  
• Lanyard hole and tough 4-position pocket clip for a variety of ambidextrous carry options

Due to our fondness of Horace Kephart’s versatile drop point blade design, SlicKnives created folding versions of the blade design in our FlicKnives and SlipjointKnives series, so that we all can carry one every day.  While not made for batoning wood, our drop point folders are built tough and are slicey to help you get your work done. 

SlicKnives has designed our FlicKnives series in the U.S. and have them made from distressed, tumbled, and stonewashed AUS10 stainless steel by our expert knife making partners in Taiwan to help hard use blend into the blade finish.  The Pocket _3.5 ^TM includes a smooth one-hand manual opening 3.5” drop point blade with a thumb stud and bronze washer pivot, a solid liner lock with ceramic detent, and a full comfortable grip with a strong 4-position stonewashed pocket clip that is a perfect large EDC knife choice. 

The Pocket _3.5 comes super-sharp out of the box with a full flat grind and a secondary beveled edge for strength, ease of sharpening, and years of service.  We’ve included jimping along the spine of the liners under your thumb to improve handling of tough jobs and along the liner lock release for easy one-hand closing.  And since it’s made with quality stainless steel, you won’t need to worry about the edge or blade corroding at the end of the day.

Black G10 scales have been chosen to provide a tough, long-lasting grip that holds up over a day’s work, even when it gets wet.  The ergonomic grip is mounted to the Pocket _3.5 with screws for durability and includes a hole that’s ready for a safety cord or brightly colored length of paracord for improved visibility if you so choose.  Adding a Pocket _3.5 to your EDC items will prove to be one of the wisest long-term choices that you can make.

And if you don’t care for the included black scales, check out our easy-to-change options in a variety of colors, so that you can customize the Pocket _3.5 to your liking!

If you don’t care for thumb stud opening and prefer a flipper in the same drop point blade, check out our FlicKnives EDC _3.5 model an alternative!

Pocket _3.5 Specifications:

Blade Length: 3.5" (8.9 cm)

Blade Action: Thumb stud with bronze washer pivot and liner lock

Closed Length: 5" (12.7 cm)

Overall Length: 8.5" (21.6 cm)

Blade Material: Japanese AUS10 Stainless Steel

Blade Thickness: 0.13" (3.3 mm)

Blade Hardness: 58-60

Blade Style: Drop Point with sharpening choil

Blade Grind: High flat ground blade

Blade Finish: Distressed and tumbled stonewash

Pocket Clip: Ambidextrous 4-position distressed and tumbled stonewashed stainless steel

Handle Material: Easy-to-swap Black G10

Liners: Stainless steel

Knife Weight: 4.4 Oz. (125 g)

Packaged Weight: 5.1 Oz. (145 g)

SKU: FK3.5KTPBLK

UPC: 850066675106

Made in Taiwan

CA Prop 65 Warning: Cancer and Reproductive Harm - www.P65warnings.ca.gov

There are numerous reviews of the Pocket 3.5 on YouTube showing this blade - here are a few to get you started:

AJ over at Heavy Pockets is a big fan of the Pocket 3.5 - we're grateful that he bestowed it with his Best Budget Knife of 2025 Award:

Todd over at Odin's Wolf Survival puts the Pocket 3.5 through its paces in his full review and scales swap:

Ron offers his thoughts on the Pocket 3.5 over on his Channel, RonTactical:

All FlicKnives 3.5 series knives are built using standard black G10 scales. 

For a custom look, SlicKnives offers a variety of popular colors like these black micarta scales.  They are super-easy to swap out and install using the originally-supplied hardware on any FlicKnives 3.5 model knife.

Knives are purchased separately.  This item includes 1 matched pair of black micarta scales that fit all models of the FlicKnives 3.5 series folding knives.

Scales Swap Installation Video on YouTube

Scales Swap with Blackout Hardware Kit Installation Video on YouTube

Is thread locker necessary?

All FlicKnives 3.5 series knives are built using standard black G10 scales. 

For a custom look, SlicKnives offers a variety of popular colors like these blue G10 scales.  They are super-easy to swap out and install using the originally-supplied hardware on any FlicKnives 3.5 model knife.

Knives are purchased separately.  This item includes 1 matched pair of blue G10 scales that fit all models of the FlicKnives 3.5 series folding knives.

Scales Swap Installation Video on YouTube

Scales Swap with Blackout Hardware Kit Installation Video on YouTube

Is thread locker necessary?

All FlicKnives 3.5 series knives are built using standard black G10 scales. 

For a custom look, SlicKnives offers a variety of popular colors like these brown G10 scales.  They are super-easy to swap out and install using the originally-supplied hardware on any FlicKnives 3.5 model knife.

Knives are purchased separately.  This item includes 1 matched pair of brown G10 scales that fit all models of the FlicKnives 3.5 series folding knives.

Scales Swap Installation Video on YouTube

Scales Swap with Blackout Hardware Kit Installation Video on YouTube

Is thread locker necessary?

All FlicKnives 3.5 series knives are built using standard black G10 scales. 

For a custom look, SlicKnives offers a variety of popular colors like these brown natural micarta scales.  They are super-easy to swap out and install using the originally-supplied hardware on any FlicKnives 3.5 model knife.

Knives are purchased separately.  This item includes 1 matched pair of brown natural micarta scales that fit all models of the FlicKnives 3.5 series folding knives.

Scales Swap Installation Video on YouTube

Scales Swap with Blackout Hardware Kit Installation Video on YouTube

Is thread locker necessary?

All FlicKnives 3.5 series knives are built using standard black G10 scales. 

For a custom look, SlicKnives offers a variety of popular colors like these dark tan G10 scales.  They are super-easy to swap out and install using the originally-supplied hardware on any FlicKnives 3.5 model knife.

Knives are purchased separately.  This item includes 1 matched pair of dark tan G10 scales that fit all models of the FlicKnives 3.5 series folding knives.

Scales Swap Installation Video on YouTube

Scales Swap with Blackout Hardware Kit Installation Video on YouTube

Is thread locker necessary?

All FlicKnives 3.5 series knives are built using standard black G10 scales. 

For a custom look, SlicKnives offers a variety of popular colors like these gray G10 scales.  They are super-easy to swap out and install using the originally-supplied hardware on any FlicKnives 3.5 model knife.

Knives are purchased separately.  This item includes 1 matched pair of gray G10 scales that fit all models of the FlicKnives 3.5 series folding knives.

Scales Swap Installation Video on YouTube

Scales Swap with Blackout Hardware Kit Installation Video on YouTube

Is thread locker necessary?