SlicKnives is proud to collaborate with CATELLIERmade!

Check out our leather Valet Tray, built to catch your EDC items, measures 6x6 inches inside, and has a footprint of about 7.5x7.5 inches.

Expertly handcrafted start to finish by Ryan at CATELLIERmade right here in Castle Rock, CO, it's made of supple 3-4oz brown Horween Chromexcel leather with strong matte black snaps that can be undone for packing it flat - makes it a perfect travel companion. Chromexcel is characterized by a rich pull-up in its full aniline, hand rubbed oil finish that only looks better when your personalized patina is applied every time you toss your EDC items into at the end of the day.

Please note: while the color is quite consistent, the surface of the leather will be unique to your piece and will patina based on your use. It looks great out of the gate and gets even better with age! The EDC items shown in the second picture are not included.

Be sure to check out CATELLIERmade's website and follow them on Instagram or Facebook!

SlicKnives is proud to collaborate with CATELLIERmade!

Check out our EDC Minimalist Wallet, built to carry 3-6 cards and measures 2.75x4 inches - it's intentionally slim for easy carry in your pocket, bag, or purse.

Expertly handcrafted start to finish by Ryan at CATELLIERmade right here in Castle Rock, CO, it's made of supple 3-4oz brown Horween Chromexcel leather and tough matching brown stitching that stands up to years of use. Chromexcel is characterized by a rich pull-up in its full aniline, hand rubbed oil finish that only looks better when your personalized patina is applied though everyday carry.

Please note: while the color is quite consistent, the surface of the leather will be unique to your piece and will patina based on your use. It looks great out of the gate and gets even better with age! The cards and items shown in the second picture are not included.

Be sure to check out CATELLIERmade's website and follow them on Instagram or Facebook!

Large Belt Sheath Dangler Key Features:

• Sheath is not included
• Premium black leather vertical drop adapter for lower, flexible belt carry
• Dual secure snaps for easy attachment to belt or carrying strap
• Options for quick detachment from the belt without having to unbuckle and remove the belt from the pants' belt loops
• Use the removeable stainless steel D-shackle for a more-controlled vertical carry and other tasks that surface requiring up to an 850 lb. working load limit
• Using the stainless steel cable provides the ultimate dangling flexibility
• Fits belts up to 2.75" wide
• Designed to fit and support 1.125" to 1.5" wide sheath loops

Since most users prefer carrying fixed blades on their belt at the waist, SlicKnives sheaths are designed with a single loop to be carried accordingly and are expertly crafted from tough premium leather that features a smooth even finish. 

However, some users prefer to carry their belt sheath a bit lower for easier reach, flexibility when sitting down or quickly changing positions, and to help clear bulkier clothing layers when colder weather requires more insulation.  SlicKnives has created this large sheath dangler to provide our users with flexible carrying options in the same tough black leather finish for a clean matching appearance.  This dangler looks good with other brands of black sheaths, too!

SlicKnives' leather dangler is stout and it is designed to quickly attach or detach from the user's belt without having to unbuckle the belt thanks to a couple of secure snaps.  Additionally, this sheath adapter includes two stainless steel sheath loop attachment options depending on the user' preferences: one that offers a more-controlled vertical carry or the other that allows for the ultimate in positioning flexibility.

Large Belt Sheath Dangler Specifications:

Belt Adapter Material: Premium Black Leather - Matches SlicKnives' Sheaths

Leather Thickness: 0.12"

Drop from the Top of the Carrying Belt to Top of Sheath Belt Loop: About 5" - 5.5" (12.7cm - 14cm)

Fits Belts Up To: 2.75" Wide (7cm)

Leather Adapter Width: 1.4" (36mm)

Designed to Support Sheath Loop Widths: 1.125" - 1.5" (28.6mm - 38mm)

D-shackle Attachment Material: Stainless Steel

D-shackle Attachment Internal Width: 1.5" (38mm)

D-shackle Attachment Working Load Limit (WLL): 850 lb (385 kg)

Cable Attachment Material: Black PVC-coated Stainless Steel

Cable Attachment Internal Width: 1.5" (38mm)

Cable Attachment Working Load Limit (WLL): Not weight or load bearing

Weight: 3 Oz. (85 g)

SKU: SKLDBLKL

UPC: 850066675137

Assembled in the USA: Belt Loop Made in Spain, Shackle and Cable Made in China

CA Prop 65 Warning: Cancer and Reproductive Harm - www.P65warnings.ca.gov

Large Belt Sheath Dangler Key Features:

• Sheath is not included
• Premium brown leather vertical drop adapter for lower, flexible belt carry
• Dual secure snaps for easy attachment to belt or carrying strap
• Options for quick detachment from the belt without having to unbuckle and remove the belt from the pants' belt loops
• Use the removeable stainless steel D-shackle for a more-controlled vertical carry and other tasks that surface requiring up to an 850 lb. working load limit
• Using the stainless steel cable provides the ultimate dangling flexibility
• Fits belts up to 2.75" wide
• Designed to fit and support 1.125" to 1.5" wide sheath loops

Since most users prefer carrying fixed blades on their belt at the waist, SlicKnives sheaths are designed with a single loop to be carried accordingly and are expertly crafted from tough premium leather that features a smooth even finish. 

However, some users prefer to carry their belt sheath a bit lower for easier reach, flexibility when sitting down or quickly changing positions, and to help clear bulkier clothing layers when colder weather requires more insulation.  SlicKnives has created this large sheath dangler to provide our users with flexible carrying options in the same tough brown leather finish for a clean matching appearance.  This dangler looks good with other brands of dark brown sheaths, too!

SlicKnives' leather dangler is stout and it is designed to quickly attach or detach from the user's belt without having to unbuckle the belt thanks to a couple of secure snaps.  Additionally, this sheath adapter includes two stainless steel sheath loop attachment options depending on the user' preferences: one that offers a more-controlled vertical carry or the other that allows for the ultimate in positioning flexibility.

Large Belt Sheath Dangler Specifications:

Belt Adapter Material: Premium Brown Leather - Matches SlicKnives' Sheaths

Leather Thickness: 0.12"

Drop from the Top of the Carrying Belt to Top of Sheath Belt Loop: About 5" - 5.5" (12.7cm - 14cm)

Fits Belts Up To: 2.75" Wide (7cm)

Leather Adapter Width: 1.4" (36mm)

Designed to Support Sheath Loop Widths: 1.125" - 1.5" (28.6mm - 38mm)

D-shackle Attachment Material: Stainless Steel

D-shackle Attachment Internal Width: 1.5" (38mm)

D-shackle Attachment Working Load Limit (WLL): 850 lb (385 kg)

Cable Attachment Material: Silver PVC-coated Stainless Steel

Cable Attachment Internal Width: 1.5" (38mm)

Cable Attachment Working Load Limit (WLL): Not weight or load bearing

Weight: 3 Oz. (85 g)

SKU: SKLDBRNL

UPC: 850066675144

Assembled in the USA: Belt Loop Made in Spain, Shackle and Cable Made in China

CA Prop 65 Warning: Cancer and Reproductive Harm - www.P65warnings.ca.gov

SlicKnives Blackout Pocket Clip and Hardware Kit fits all FlicKnives 3.5 & SlipjointKnives 3.5 models.  This kit provides a quick and easy way to swap out the original stainless clip and hardware with black hardware for a sleek custom look.

Kit Includes:
1 Matte Black Pocket Clip
2 Pivot Screws
3 Pocket Clip Screws
8 Scale Screws
1 T10 & T6 Tool

Blackout Hardware Kit only
Knife is purchased separately

Blackout Hardware Kit Installation Video on YouTube

Scales Swap with Blackout Hardware Kit Installation Video on YouTube

Is thread locker necessary?

CA Prop 65 Warning: Cancer and Reproductive Harm - www.P65warnings.ca.gov

SlicKnives Stainless Steel Pocket Clip fits all FlicKnives 3.5 & SlipjointKnives 3.5 models.  This pocket clip is a great backup solution if you want to be prepared should you bend or break one or happen to have misplaced or lost any of the original pocket.

Includes:
1 Distressed and Tumbled Stonewash Finish Stainless Steel Pocket Clip

Stainless Pocket Clip only
Knife and/or Hardware are purchased separately

Is thread locker necessary?

CA Prop 65 Warning: Cancer and Reproductive Harm - www.P65warnings.ca.gov

SlicKnives Stainless Steel Hardware Kit fits all FlicKnives 3.5 & SlipjointKnives 3.5 models.  This kit is a great backup solution if you want to be prepared with extra hardware or happen to have misplaced or lost any of the original screws from your folder during use.

Kit Includes:
2 Pivot Screws
3 Pocket Clip Screws
8 Scale Screws
1 T10 & T6 Tool

Stainless Hardware Kit only
Knife and/or Pocket Clip are purchased separately

Is thread locker necessary?

CA Prop 65 Warning: Cancer and Reproductive Harm - www.P65warnings.ca.gov

This Large Ferro Rod features a carbon steel striker with a long leather lanyard, so that it's always ready when needed!

The Large 6-inch Ferrocerium Rod will provide thousands of high-temperature sparks to help get your fire started.  Toss it in your pack or carry it around your neck for quick access when an urgent fire is required.

The large ferro rod does not fit SlicKnives sheaths.

Key Features:

• Provides thousands of sparks when being struck with the included carbon steel striker or via the back of a 90-spine of a knife
• Impervious to water, so that it’s always ready – just wipe it dry, lay dry tinder in your fire set, and strike it to get a fire roaring
• The multi-use striker is powder-coated black, includes a bottle opener, has a 50cm metric ruler for quick measurements, and scraper on one end
• The brown leather lanyard is long enough to be carried around the neck or can be used as cordage when needed

Caution - All commercially available ferro rods are coated with a protectant to prevent corrosion after they have been made.  Once the ferro rod has been scraped, the exposed iron in the rod will corrode over time when humidity or water is present.  A corroded ferro rod still works as a good fire starter, however, its rust can stain materials that are in contact with it. 

SlicKnives suggests storing a used ferro rod separately from fabrics and leather sheaths to protect against rust stains.  A thin layer of petroleum jelly can help protect a used ferro rod's surface while being stored and is easy to wipe off when the ferro rod is needed to start the next fire.

Specifications:

Rod Length: 6" (152.4mm)

Rod Width: 1/2" (12.7mm)

Striker Length: 3” (76.2mm)

Diameter of the Looped Lanyard: About 16" (40+cm)

Length of Lanyard when Untied: About 32” (80+cm)

Lanyard Material: Brown Leather

Weight: 5.1 Oz. (145 g)

Imported from China

CA Prop 65 Warning: Cancer and Reproductive Harm - www.P65warnings.ca.gov

This Medium Ferro Rod features a carbon steel striker with a braided dark olive green paracord lanyard long enough for easy striking!

The Medium 4-inch Ferrocerium Rod will provide thousands of high-temperature sparks to help get your fire started.  Toss it in your pack or pocket for quick access!

The medium ferro rod does not fit SlicKnives sheaths.

Key Features:

• Provides thousands of sparks when being struck with the included carbon steel striker or via the back of a 90-spine of a knife
• The braided olive green paracord lanyard provides a larger grip, enough length to easily strike the rod, and nice 4 foot length of cordage if needed
• Impervious to water, so that it’s always ready – just wipe it dry, lay dry tinder in your fire set, and strike it to get a fire roaring
• The carbon steel striker includes an ergonomic polymer grip, is powder-coated black, has a scraper on one edge, and a flat edge for making spark fly

Caution - All commercially available ferro rods are coated with a protectant to prevent corrosion after they have been made.  Once the ferro rod has been scraped, the exposed iron in the rod will corrode over time when humidity or water is present.  A corroded ferro rod still works as a good fire starter, however, its rust can stain materials that are in contact with it. 

SlicKnives suggests storing a used ferro rod separately from fabrics and leather sheaths to protect against rust stains.  A thin layer of petroleum jelly can help protect a used ferro rod's surface while being stored and is easy to wipe off when the ferro rod is needed to start the next fire.

Specifications:

Rod Length: 4" (100mm)

Rod Width: 3/8" (10mm)

Overall Striker Length: 2.5” including the grip (63.5mm)

Striking Edge Length: 0.75” (20mm)

Overall Length of the Braided and Looped Lanyard: About 13" (33+cm)

Length of the Braided Portion of Lanyard: About 3.5" (8.9+cm)

Diameter of the Looped Portion of Lanyard: About 9.5" (24+cm)

Length of Lanyard Cordage when Unbraided: About 4 feet (1.2+m)  / 48" (121+cm)

Lanyard Material: Dark Olive Green Paracord

Weight: 2.4 Oz. (68 g)

Imported from China

CA Prop 65 Warning: Cancer and Reproductive Harm - www.P65warnings.ca.gov

The Standard Ferrocerium Rod is designed to rain high-temperature sparks down on a fire set to help get things warmed up when in need. 

This replacement rod fits all SlicKnives sheaths.  It does not include a new shock cord; please, use the originally-supplied shock cord received with your knife to loop it through the drilled hole to securely fit the ferro rod loop on your sheath.  Pick up any of the Standard Ferro Rods with installed shock cord for a direct fit.

Key Features:

• Provides showers of sparks when being struck with the 90-degree spine of a fixed blade knife
• Fits all SlicKnives Sheaths that feature a ferro rod loop
• Please, use the originally-supplied shock cord that came with your knife to loop it through the drilled hole

Caution - All commercially available ferro rods are coated with a protectant to prevent corrosion after they have been made.  Once the ferro rod has been scraped, the exposed iron in the rod will corrode over time when humidity or water is present.  A corroded ferro rod still works as a good fire starter, however, its rust can stain materials that are touching it accordingly. 

SlicKnives suggests storing a used ferro rod separately from our leather sheaths to protect the sheath from becoming rust stained - unless you're looking for that sort of patina.  A thin layer of petroleum jelly can help protect a used ferro rod's surface while being stored and is easy to wipe off when the ferro rod is needed to start the next fire.

Specifications:

Rod Length: 3.15" (80mm)

Width: 5/16" (8mm)

Overall Length Including Lanyard: About 6"

Lanyard Material: None

Weight: 1.1 Oz. (31.2 g)

Made in China

CA Prop 65 Warning: Cancer and Reproductive Harm - www.P65warnings.ca.gov

This Standard Ferro Rod features a Black shock cord lanyard for ease of use and to secure it, so that it's always ready when needed.

The Standard Ferrocerium Rod is designed to rain high-temperature sparks down on a fire set to help get things warmed up when in need.  It securely fits all SlicKnives sheaths that feature a ferro rod loop, so that a fire starter can be kept close at hand while in the field.

Key Features:

• Provides showers of sparks when being struck with the 90-degree spine of a fixed blade knife
• Fits all SlicKnives Sheaths that feature a ferro rod loop
• Black Shock Cord Lanyard for improved handling
• 1/8" loop of shock cord offers secure mounting options such as sheaths, molle webbing, and a variety of packs

Caution - All commercially available ferro rods are coated with a protectant to prevent corrosion after they have been made.  Once the ferro rod has been scraped, the exposed iron in the rod will corrode over time when humidity or water is present.  A corroded ferro rod still works as a good fire starter, however, its rust can stain materials that are touching it accordingly. 

SlicKnives suggests storing a used ferro rod separately from our leather sheaths to protect the sheath from becoming rust stained - unless you're looking for that sort of patina.  A thin layer of petroleum jelly can help protect a used ferro rod's surface while being stored and is easy to wipe off when the ferro rod is needed to start the next fire.

Specifications:

Rod Length: 3.15" (80mm)

Width: 5/16" (8mm)

Overall Length Including Lanyard: About 6"

Lanyard Material: Black Shock Cord

Weight: 1.1 Oz. (31.2 g)

Assembled in the USA from Materials Imported from China

CA Prop 65 Warning: Cancer and Reproductive Harm - www.P65warnings.ca.gov

This Standard Ferro Rod features a Brown shock cord lanyard for ease of use and to secure it, so that it's always ready when needed.

The Standard Ferrocerium Rod is designed to rain high-temperature sparks down on a fire set to help get things warmed up when in need.  It securely fits all SlicKnives sheaths that feature a ferro rod loop, so that a fire starter can be kept close at hand while in the field.

Key Features:

• Provides showers of sparks when being struck with the 90-degree spine of a fixed blade knife
• Fits all SlicKnives Sheaths that feature a ferro rod loop
• Brown Shock Cord Lanyard for improved handling
• 1/8" loop of shock cord offers secure mounting options such as sheaths, molle webbing, and a variety of packs

Caution - All commercially available ferro rods are coated with a protectant to prevent corrosion after they have been made.  Once the ferro rod has been scraped, the exposed iron in the rod will corrode over time when humidity or water is present.  A corroded ferro rod still works as a good fire starter, however, its rust can stain materials that are touching it accordingly. 

SlicKnives suggests storing a used ferro rod separately from our leather sheaths to protect the sheath from becoming rust stained - unless you're looking for that sort of patina.  A thin layer of petroleum jelly can help protect a used ferro rod's surface while being stored and is easy to wipe off when the ferro rod is needed to start the next fire.

Specifications:

Rod Length: 3.15" (80mm)

Width: 5/16" (8mm)

Overall Length Including Lanyard: About 6"

Lanyard Material: Brown Shock Cord

Weight: 1.1 Oz. (31.2 g)

Assembled in the USA from Materials Imported from China

CA Prop 65 Warning: Cancer and Reproductive Harm - www.P65warnings.ca.gov