This listing is for the one-off knife and custom sheath combination pictured.

Hunter ₅ Key Features:

• Crafted from tough, highly corrosion-resistant Sandvik 14c28n steel
• Slicey full tang drop point flat ground blade with 90-degree spine
• Grippy non-removable hand-shaped black canvas micarta handle with hole for a lanyard
• Jimping along the spine in front of the handle when extra grip is needed
• Woodland Night Stalker Camo KYDEX® sheath - custom fit to this exact knife with black belt lock & belt clip - includes 5/16" ferro rod & carry loop
• Built to handle field dressing and skinning game - and it's ready to take on other fixed knife duties, as well
  

The Hunter ₅ ^TM is one of SlicKnives’ original marque models in our Premium SlicKnives series and is built for a lifetime of use.

This classic drop point blade is designed to help make quick work of dressing game in the field and to make processing that game easier once you get back to camp or home.  Regardless of where you’re chasing game, the 5” blade on the Hunter ₅ is sure to become a favorite choice in your collection!

Designed in the U.S. by an experienced big game hunter, our expert knife making partners in Albacete, Spain, have hand crafted it from Sandvik 14c28n stainless steel; it will be your rugged companion that you can depend on while hunting.  You can rely on its toughness, enjoy the edge that easy to keep sharp when the work is done, and not worry about it corroding when the weather’s not been so nice or when you get back to camp late at night after packing out your game.

The Hunter ₅ comes sharp out of the box with a full flat grind and has a secondary beveled edge for strength.  The curved spine helps make field dressing game go smoothly, and the rounded belly helps tackle skinning with ease.  To provide a consistent experience while skinning your game, we’ve included jimping along the spine for safe handling.

Black canvas micarta next to the full-tang blade provides a good-looking grip that helps get the work done safely even when it’s gets slippery.  The non-removable ergonomic grip is mounted with three sets of stainless screws for a durable handle and includes a hole in the handle that’s ready for a safety cord or length of brightly colored paracord to help you find your Hunter ₅ after you set it down for a moment when getting work done.

The custom Woodland Night Stalker Camo KYDEX® sheath is hand-fitted to protect your Hunter ₅ allowing for vertical or horizontal belt carry keeping it ready for the next task or for protecting the blade and your gear if you prefer to carry it in your pack instead.  The pictured belt lock & belt clip are both included for numerous carry options and the hole spacing on the sheath is to the industry standard of 3/4" on center.  KYDEX® sheaths will scratch the blade with use - please, keep the sheath clean and free of debris.

The Hunter ₅ is built to take care of game and SlicKnives is most certain that you’ll be pleased with your purchase after your next successful hunt.  Grab one today, so that you have one along on your next hunt!

Hunter ₅ Specifications:

Blade Length: 5" (12.7 cm)

Handle Length: 4.875" (12.3 cm)

Overall Length: 9.875" (25 cm)

Blade Material: Sandvik 14c28n Stainless Steel

Blade Thickness: 0.156" (3.96 mm)

Blade Hardness: 60-61

Blade Style: Drop Point

Blade Grind: Full flat grind with secondary beveled edge

Blade Finish: Satin

Handle Material: Black Canvas Micarta

Sheath: Woodland Night Stalker Camo KYDEX® with black belt lock & belt clip as pictured

Knife Weight: 8 Oz. (227 g)

Knife with Sheath and Ferro Rod Weight: 13 Oz. (369 g)

Packaged Weight: 20 Oz. (567 g)

SKU: OO00020SKHU5

Knife Made in Spain by Cudeman S.A.

Custom Fit Woodland Night Stalker Camo KYDEX® Sheath Assembled in the USA from Domestic and Imported Materials

Ferro Rod Assembled in the USA from Materials Imported from China

CA Prop 65 Warning: Cancer and Reproductive Harm - www.P65warnings.ca.gov

This listing is for the one-off knife and custom combination pictured.

ClipPoint _4.5 Key Features:

• Made with tough and highly corrosion-resistant Sandvik 14c28n stainless steel
• Full tang 4.5” clip point high flat ground blade melts into a full flat grind from the high point of the blade to the tip
• 90-degree spine for scraping fatwood and striking a ferro rod
• Permanent non-removable hand-shaped olive green G10 scales with black liner grip with hole for a lanyard
• Premium black leather vertical belt carry sheath with 5/16" ferro rod loop – ferro rod included
• Includes a U.S. military issue, made in USA pouch (6.25" x 2.75" x 1") attached with two tied shock cords and doubled-up ranger bands to carry additional kit
• Pouch contains an EZE-LAP diamond and ceramic sharpener with leather pouch for stropping and a water tight aluminum tube for carrying a couple Bigfoot Bushcraft Fireplugs for emergency fire starting
• Plenty of room left in the pouch for additional survival and bushcrafting supplies to round out your personal kit

The SlicKnives ClipPoint _4.5 ^TM is fashioned after the numerous historical clip point blades that moved west across the U.S. with hearty pioneers.  This tried-and-true blade shape helps its user accomplish all sorts of tasks from processing wild game in the field to prepping the veggies for the salad followed by slicing off a piece of perfectly done steak at dinner.  

Designed in the U.S. and hand made from Sandvik 14c28n stainless steel by our expert knife making partners in Albacete, Spain, the ClipPoint _4.5 is tough with an edge that holds up and is easy to sharpen after use.  The 4.5” blade, comfortable full grip, and beautiful premium leather vertical carry sheath combine to make this blade a dream to have along for whatever ride presents itself.  And unlike the old-time original clip point blades, SlicKnives’ design has an ergonomic grip to protect the user from slipping forward onto the sharpened edge when the work gets slippery, which unfortunately, was a common injury associated with the early designs back in the day.

The ClipPoint _4.5 comes amazingly sharp out of the box with a high flat ground blade that melts into a full flat grind from the high point of the blade out to the tip and includes a secondary beveled edge for strength and long life.  Jimping has been included along the spine in front of the Ricasso for sure handling when the going gets tough.  And since it’s made with quality stainless steel, you won’t need to worry about the edge or blade corroding at the end of the day.

Olive Green G10 scales with a Black G10 liner attached to the full-tang provides a hand-shaped foundation that gets even grippier when wet.  The non-removeable scales are permanently mounted to the ClipPoint _4.5 with three stainless steel screws for durability and includes a buterola that’s ready to accept your lanyard for the occasions that call for added safety measures.  Additionally, the 90-degree spine is perfect for getting a fire started with the included ferro rod. 

The premium hand-made leather sheath provides vertical belt carry and includes a loop to keep your ferro rod close at hand.  The dye on newly-made sheaths may become visible on the front part of the G10 grip in the area that grips the inside of the sheath creating a unique patina, however, it can be cleaned off easily and will fade with use as the sheath wears and ages.

SlicKnives is certain that you’ll be happy choosing this quality knife – pick it up today!

ClipPoint _4.5 Specifications:

Blade Length: 4.5" (11.4 cm)

Handle Length: 4.875" (12.4 cm)

Overall Length: 9.375" (23.8 cm)

Blade Material: Sandvik 14c28n Stainless Steel

Blade Thickness: 0.156" (3.96 mm)

Blade Hardness: 60-61

Blade Style: Clip point

Blade Grind: High flat ground blade melts into a full flat grind from the high point of the blade to the tip

Blade Finish: Satin

Handle Material: Olive Green G10 Scales with a Black G10 Liner

Sheath: Belt Carry Black Leather - the dye on newly-made sheaths may become visible on the front part of the G10 grip in the area that grips the inside of the sheath creating a unique patina, however, it can be cleaned off easily and will fade with use as the sheath wears and ages

Knife Weight: 8 Oz. (227 g)

Knife with Sheath, Ferro Rod, Pouch, and Sharpener Weight: 17 Oz. (482 g)

Packaged Weight: 22 Oz. (624 g)

SKU: OO00012SKCP4.5

Knife and Premium Leather Sheath Made in Spain by Cudeman S.A.

Ferro Rod, U.S. Military Issue Pouch, EZE-LAP Diamond/Ceramic Sharpener with Leather Pouch, and Bigfoot Bushcraft Fireplugs in a waterproof aluminum tube made or assembled in the USA from domestic and imported materials

CA Prop 65 Warning: Cancer and Reproductive Harm - www.P65warnings.ca.gov

This listing is for the one-off knife and custom sheath combination pictured.

Hunter ₅ Key Features:

• Crafted from tough, highly corrosion-resistant Sandvik 14c28n steel
• Slicey full tang drop point flat ground blade with 90-degree spine
• Grippy hand-shaped brown linen micarta handle with hole for a lanyard
• Jimping along the spine in front of the handle when extra grip is needed
• TrueTimber® Strata camo KYDEX® sheath - custom fit to this exact knife with black belt lock & belt clip - includes 5/16" ferro rod & carry loop
• Built to handle field dressing and skinning game - and it's ready to take on other fixed knife duties, as well
  

The Hunter ₅ ^TM is one of SlicKnives’ original marque models in our Premium SlicKnives series and is built for a lifetime of use.

This classic drop point blade is designed to help make quick work of dressing game in the field and to make processing that game easier once you get back to camp or home.  Regardless of where you’re chasing game, the 5” blade on the Hunter ₅ is sure to become a favorite choice in your collection!

Designed in the U.S. by an experienced big game hunter, our expert knife making partners in Albacete, Spain, have hand crafted it from Sandvik 14c28n stainless steel; it will be your rugged companion that you can depend on while hunting.  You can rely on its toughness, enjoy the edge that easy to keep sharp when the work is done, and not worry about it corroding when the weather’s not been so nice or when you get back to camp late at night after packing out your game.

The Hunter ₅ comes sharp out of the box with a full flat grind and has a secondary beveled edge for strength.  The curved spine helps make field dressing game go smoothly, and the rounded belly helps tackle skinning with ease.  To provide a consistent experience while skinning your game, we’ve included jimping along the spine for safe handling.

Brown linen micarta and a thin black liner next to the full-tang blade provides a good-looking grip that helps get the work done safely even when it’s gets slippery.  The ergonomic grip is mounted with three sets of stainless screws for a durable handle and includes a hole in the handle that’s ready for a safety cord or length of brightly colored paracord to help you find your Hunter ₅ after you set it down for a moment when getting work done.

The custom TrueTimber® Strata camo KYDEX® sheath is hand-fitted to protect your Hunter ₅ allowing for vertical or horizontal belt carry keeping it ready for the next task or for protecting the blade and your gear if you prefer to carry it in your pack instead.  The pictured belt lock & belt clip are both included for numerous carry options and the hole spacing on the sheath is to the industry standard of 3/4" on center.  KYDEX® sheaths may scratch the blade with use - please, keep the sheath clean and free of debris.

The Hunter ₅ is built to take care of game and SlicKnives is most certain that you’ll be pleased with your purchase after your next successful hunt.  Grab one today, so that you have one along on your next hunt!

Hunter ₅ Specifications:

Blade Length: 5" (12.7 cm)

Handle Length: 4.875" (12.3 cm)

Overall Length: 9.875" (25 cm)

Blade Material: Sandvik 14c28n Stainless Steel

Blade Thickness: 0.156" (3.96 mm)

Blade Hardness: 60-61

Blade Style: Drop Point

Blade Grind: Full flat grind with secondary beveled edge

Blade Finish: Satin

Handle Material: Brown Linen Micarta

Sheath: TrueTimber® Strata camo KYDEX® with black belt lock & belt clip as pictured

Knife Weight: 8 Oz. (227 g)

Knife with Sheath and Ferro Rod Weight: 13 Oz. (369 g)

Packaged Weight: 20 Oz. (567 g)

SKU: OO00007SKHU5

Knife Made in Spain by Cudeman S.A.

Custom Fit TrueTimber® Strata Camo KYDEX® Sheath Assembled in the USA from Domestic and Imported Materials

Ferro Rod Assembled in the USA from Materials Imported from China

CA Prop 65 Warning: Cancer and Reproductive Harm - www.P65warnings.ca.gov

This listing is for the one-off knife and custom sheath combination pictured.

Curve _4.5 Key Features:

• Crafted from highly corrosion-resistant and edge-holding Bӧhler N690co German steel
• Slicey full tang straight back hollow ground blade
• Grippy permanent non-removable hand-shaped black canvas micarta handle with hole for the pictured lanyard featuring a brushed finish stainless steel bead
• Jimping along the spine when extra grip is needed
• Pink & Purple Woodland Camo KYDEX® - custom fit to this exact knife with 3/4" on center hole spacing to support common mounting options and includes the pictured belt lock and belt clip
• Built to handle a wide variety of slicing tasks including light camp chores, processing game, and prepping dinner
  

SlicKnives’ founder bumped into a basic straight back roach belly-profiled knife years ago and fell in love with its simplicity and wonderful game processing capabilities.  The Curve _4.5 ^TM is part of our Premium SlicKnives series with a blade profile based on the early American colonial patterns that, due to the low cost to make it at that time, were common back in the day and loved by trappers, hunters, scouts, and pioneers during Americans’ westward migration.  

The beauty of the Curve _4.5 isn’t only tied to its ability to skin and process meat with its long-curved belly, but it’s super-slicey profile is a wonderful choice for general food preparation in camp or in the kitchen.  And it's a wonderful bird and trout knife.  Whether you use it for processing game or for slicing veggies to put in your stew, you’ll love the Curve _4.5!

Designed in the U.S. and made from German Bӧhler N690co stainless steel by our expert knife making partners in Albacete, Spain, you’ll be able to rely on an edge that holds up for all your slicing needs.  The 4.5” blade length and slim grip will help you perform fine tasks in an easy-to-maneuver nimble profile. 

The Curve _4.5 comes out of the box super-sharp with a hollow grind and a secondary beveled edge for strength and years of service.  We’ve included jimping along the spine in front of the Ricasso for sure handling.  And since it’s made with quality German stainless steel, you won’t need to worry about the edge or blade corroding when it’s not in use.

Black canvas micarta next to the full-tang blade provides a slim and grippy, hand-sculpted foundation that’s sure to please, even when it gets wet.  The non-removable ergonomic grip is mounted with two sets of stainless screws and includes the pictured lanyard with brushed finish stainless steel bead.

The custom Pink & Purple Woodland Camo KYDEX® sheath is hand-fitted to protect your Curve _4.5 allowing for vertical or horizontal belt carry keeping it ready for the next task or for protecting the blade and your gear if you prefer to carry it in your pack instead.  The pictured belt lock & belt clip are both included for numerous carry options and the hole spacing on the sheath is to the industry standard of 3/4" on center.  KYDEX® sheaths will scratch the blade with use - please, keep the sheath clean and free of debris.

Pick up SlicKnives’ Curve _4.5 today – you’ll be glad when you bring this slicer into your collection!

Curve _4.5 Specifications:

Blade Length: 4.5"

Handle Length: 4.25"

Overall Length: 8.75"

Blade Material: Bӧhler N690co Stainless Steel

Blade Thickness: 0.12"

Blade Hardness: 60-61

Blade Style: Straight back

Blade Grind: Hollow grind with secondary beveled edge

Blade Finish: Satin

Handle Material: Black Canvas Micarta

Sheath Material: Pink & Purple Woodland Camo KYDEX® with black belt clip & belt lock as pictured

Knife Weight: 4.2 Oz. (119 g)

Knife with Sheath, Lanyard & Stainless Steel Bead Weight: 5.8 Oz. (165 g)

Packaged Weight: 14 Oz. (397 g)

SKU: OO00019SKCU4.5

Knife Made in Spain by Cudeman S.A.

Custom Fit Pink Woodland Camo KYDEX® Sheath Assembled in the USA from Domestic and Imported Materials

CA Prop 65 Warning: Cancer and Reproductive Harm - www.P65warnings.ca.gov

This listing is for the one-off knife and custom sheath combination pictured.

Hunter ₅ Key Features:

• Crafted from tough, highly corrosion-resistant Sandvik 14c28n steel
• Slicey full tang drop point flat ground blade with 90-degree spine
• Grippy hand-shaped black canvas micarta handle with hole for a lanyard
• Jimping along the spine in front of the handle when extra grip is needed
• Premium black leather vertical belt carry sheath with 5/16" ferro rod loop - ferro rod included
• Includes a U.S. military surplus Woodland Camo pouch (5" x 3" x 2") attached with shock cord bands to carry additional kit
• Pouch contains an EZE-LAP diamond and ceramic sharpener with leather pouch for stropping
• Pouch contains a fresh tin of Altoids that can be used for extra kit after you enjoy the peppermints
• Plenty of room left in the pouch for additional survival and bushcrafting supplies to round out your personal kit
• Built to handle a variety of camp duties, process game, and to slice up ingredients for dinner
  

The Hunter ₅ ^TM is one of SlicKnives’ original marque models in our Premium SlicKnives series and is built for a lifetime of use.

This classic drop point blade is designed to help make quick work of dressing game in the field and to make processing that game easier once you get back to camp or home.  Regardless of where you’re chasing game, the 5” blade on the Hunter ₅ is sure to become a favorite choice in your collection!

Designed in the U.S. by an experienced big game hunter, our expert knife making partners in Albacete, Spain, have hand crafted it from Sandvik 14c28n stainless steel; it will be your rugged companion that you can depend on while hunting.  You can rely on its toughness, enjoy the edge that easy to keep sharp when the work is done, and not worry about it corroding when the weather’s not been so nice or when you get back to camp late at night after packing out your game.

The Hunter ₅ comes sharp out of the box with a full flat grind and has a secondary beveled edge for strength.  The curved spine helps make field dressing game go smoothly, and the rounded belly helps tackle skinning with ease.  To provide a consistent experience while skinning your game, we’ve included jimping along the spine for safe handling.

Black canvas micarta on the full-tang blade provides a good-looking grip that helps get the work done safely even when it’s gets slippery.  The ergonomic grip is mounted with three sets of stainless screws for a durable handle and includes a hole in the handle that’s ready for a safety cord or length of brightly colored paracord to help you find your Hunter ₅ after you set it down for a moment when getting work done.

You’ll love the premium black leather sheath to protect your Hunter 5 keeping it at the ready for the next task. The quality hand-made sheath allows for vertical belt carry. The sheath also includes a loop to carry your ferro rod that we’ve included, so that you have one close at hand when you need to build a fire quickly.

SlicKnives is positive that you’ll be happy with this quality knife – pick up this OneOff package today!

Hunter ₅ Specifications:

Blade Length: 5" (12.7 cm)

Handle Length: 4.875" (12.3 cm)

Overall Length: 9.875" (25 cm)

Blade Material: Sandvik 14c28n Stainless Steel

Blade Thickness: 0.156" (3.96 mm)

Blade Hardness: 60-61

Blade Style: Drop Point

Blade Grind: Full flat grind with secondary beveled edge

Blade Finish: Satin

Handle Material: Black Canvas Micarta

Sheath: Belt Carry Black Leather

Knife Weight: 8 Oz. (227 g)

Knife with Sheath, Sharpener, Pouch, and Full Altoids Tin Weight: 20 Oz. (567 g)

Packaged Weight: 26 Oz. (737 g)

SKU: OO00018SKHU5

Knife and Premium Leather Sheath Made in Spain by Cudeman S.A.

Ferro Rod, U.S. Military Surplus Woodland Camo Pouch, EZE-LAP Diamond/Ceramic Sharpener with Leather Pouch, shock cord bands, and Altoids made or assembled in the USA from domestic and imported materials

Ferro Rod Assembled in the USA from Materials Imported from China

CA Prop 65 Warning: Cancer and Reproductive Harm - www.P65warnings.ca.gov

This listing is for the one-off knife and custom combination pictured.

Simply the SlicKest Camp Knife Around ^TM

Kepper ₅ Key Features:

• Crafted from tough, highly corrosion-resistant Sandvik 14c28n steel
• Slicey full tang multi-use drop point flat ground blade with 90-degree spine
• Grippy hand-shaped black canvas micarta handle with hole for the included lanyard
• Jimping along the spine in front of the handle when extra grip is needed
• Premium black leather vertical belt carry sheath with 5/16" ferro rod loop - ferro rod included
• Includes a Dutch Military Surplus DPM Woodland Camo pouch (4" x 3" x 3") attached with doubled-up ranger bands to carry additional kit
• Pouch contains an EZE-LAP diamond and ceramic sharpener with leather pouch for stropping and a water tight aluminum tube for carrying a couple Bigfoot Bushcraft Fireplugs for emergency fire starting
• Plenty of room left in the pouch for additional survival and bushcrafting supplies to round out your personal kit
• Built to handle a variety of camp duties, process game, and to slice up ingredients for dinner
  

SlicKnives’ Kepper ₅ ^TM is part of our Premium SlicKnives series with a drop point blade profile based on Horace Kephart’s proven sheath knife that was part of his cutting tools ensemble discussed in his book, Camping and Woodcraft.  To be clear, the Kepper ₅ is not intended to be a clone of Horace Kephart’s knife – we just love the blade profile that he created and this is our take on his tried and true sheath knife.

Kephart’s classic sheath knife was developed over years of perfecting it while in the field.  Our Kepper ₅ embodies the proven capabilities that you expect from Kephart’s blade profile along with new features sure to make the Kepper ₅ one of your favorite fixed blade knives.  Take it with you and you’ll always have a blade that gets work done!

Designed in the U.S. and hand made from Sandvik 14c28n stainless steel by our expert knife making partners in Albacete, Spain, you’ll be able to rely upon its toughness with an edge that holds up and is easy to keep sharp.  The 5” blade length and comfortable grip will make it your go-to knife for various camp chores, processing game, and making dinner after a day in the field. 

The Kepper ₅ comes super-sharp right out of the box with a full flat grind and a secondary beveled edge for strength and years of service.  We’ve included jimping along the spine in front of the Ricasso for positive handling during tough jobs.  Its 90-degree spine is perfect for shaving your fatwood onto your fire set prior to striking the included ferro rod to get your fire started.  And since it’s made with quality stainless steel, you won’t need to worry about the edge or blade corroding at the end of the day.

Black canvas micarta next to the full-tang blade provides a grippy, hand-sculpted foundation that’s sure to please over a day’s work, even when it gets wet.  The hand-fitted ergonomic grip is mounted to the Kepper ₅ with three sets of stainless screws for durability and includes a buterola that’s ready for the included lanyard.

You’ll love the premium black leather sheath to protect your Kepper ₅ keeping it at the ready for the next task.  The quality hand-made sheath allows for vertical belt carry.  The sheath also includes a loop to carry your ferro rod that we’ve included, so that you have one close at hand when you need to build a fire quickly.

SlicKnives is positive that you’ll be happy with this quality knife – pick up this OneOff package today!

Kepper ₅ Specifications:

Blade Length: 5" (12.7 cm)

Handle Length: 4.875" (12.3 cm)

Overall Length: 9.875" (25 cm)

Blade Material: Sandvik 14c28n Stainless Steel

Blade Thickness: 0.156" (3.96 mm)

Blade Hardness: 60-61

Blade Style: Drop Point

Blade Grind: Full flat grind with secondary beveled edge

Blade Finish: Satin

Handle Material: Black Canvas Micarta

Sheath: Belt Carry Black Leather

Knife Weight: 8 Oz. (227 g)

Knife with Sheath, Ferro Rod, Pouch, and Sharpener Weight: 18 Oz. (510 g)

Packaged Weight: 24 Oz. (680 g)

SKU: OO00010SKKE5

Knife and Premium Leather Sheath Made in Spain by Cudeman S.A.

Ferro Rod, Dutch Military Surplus DPM Woodland Camo Pouch, EZE-LAP Diamond/Ceramic Sharpener with Leather Pouch, and Bigfoot Bushcraft Fireplugs in a waterproof aluminum tube made or assembled in the USA from domestic and imported materials

CA Prop 65 Warning: Cancer and Reproductive Harm - www.P65warnings.ca.gov