Model One _3.5 Key Features:

• Tough 3.5" folding & highly corrosion resistant two-handed opening slip joint Kephart knife that does not lock open
• Hard-working knife designed to be opened while wearing gloves
• 2-position blade made from Japanese AUS-10 stainless steel with a solid half-stop
• Slicey distressed tumbled stonewashed drop point high flat ground blade with sharpening choil
• Bronze pivot with strong stainless steel spring with snappy walk & talk
• Large grip with easy-to-swap black G10 scales, stainless steel liners & lanyard hole
  
• Tough 4-position pocket clip for ambidextrous carry options 

Due to our fondness of Kephart’s versatile drop point blade design, SlicKnives created folding versions of the blade design in our SlipjointKnives series, so that we all can carry one with us every day.  While not made for batoning wood, our drop point folders are built tough and are slicey to help you get your work done. 

SlicKnives has designed our SlipjointKnives series in the U.S. and have them made from distressed tumbled stonewashed AUS10 stainless steel by our expert knife making partners in Taiwan.  The Model One _3.5 ^TM includes a two-hand opening 3.5” drop point blade and a full comfortable grip with a strong 4-position stonewashed pocket clip that is a perfect large EDC knife choice. 

The Model One _3.5 comes super-sharp out of the box with a full flat grind and a secondary beveled edge for strength, ease of sharpening, and years of service.  We’ve included jimping along the spine of the liners under your thumb to improve handling of tough jobs and it’s easy to close to put it back in your pocket quickly.  And since it’s made with quality stainless steel, you won’t need to worry about the edge or blade corroding at the end of the day.

Black G10 scales have been chosen to provide a tough, long-lasting grip that holds up over a day’s work, even when it gets wet.  The ergonomic grip is mounted to the Model One _3.5 with screws for durability and includes a hole that’s ready for a safety cord or brightly colored length of paracord for improved visibility if you so choose.  Adding a Model One _3.5 to your EDC items will prove to be one of the wisest long-term choices that you can make.

And if you don’t care for the included black scales, SlipjointKnives offer easy-to-change out scale options in a variety of colors, so that you can customize the Model One _3.5 to your liking!

If you don’t care for slip joint blades and prefer a flipper or thumb stud with the same drop point blade, check out our FlicKnives EDC _3.5 or Pocket _3.5 models as alternatives!

Model One _3.5 Specifications:

Blade Length: 3.5" (8.9 cm)

Blade Action: Non-locking slip joint with bronze pivot & strong stainless steel backspring

Closed Length: 5" (12.7 cm)

Overall Length: 8.5" (21.6 cm)

Blade Material: Japanese AUS10 Stainless Steel

Blade Thickness: " ( mm)

Blade Hardness: 58-60

Blade Style: 2-position Drop point with sharpening choil with a solid half-stop

Blade Grind: High flat ground blade

Blade Finish: Distressed Tumbled Stonewashed

Pocket Clip: Ambidextrous 4-position Stonewashed stainless steel

Handle Material: Easy-to-swap Black G10

Liners: Stainless steel

Knife Weight:  Oz. ( g)

Packaged Weight:  Oz. ( g)

SKU: SJK3.5KGM1BLK

UPC: 850066675113

Made in Taiwan

CA Prop 65 Warning: Cancer and Reproductive Harm - www.P65warnings.ca.gov

Model Two _3.5 Key Features:

• Tough 3.5" folding & highly corrosion resistant two-handed opening slip joint that does not lock open
• Hard-working knife designed to be opened while wearing gloves
• 2-position blade made from Japanese AUS-10 stainless steel with a solid half-stop
• Slicey distressed tumbled stonewashed modified sheepsfoot high flat ground blade with sharpening choil
• Bronze pivot with strong stainless steel spring with snappy walk & talk
• Large grip with easy-to-swap black G10 scales, stainless steel liners & lanyard hole
  
• Tough 4-position pocket clip for ambidextrous carry options 

SlicKnives absolutely loves basic, single slip joint blade designs that everyday people rely upon to get their work done everyday.  If you need a slicey and hard-working slip joint blade, our SlipjointKnives series of folding knives are just for you.

SlicKnives has designed our SlipjointKnives series in the U.S. and have them made from distressed tumbled stonewashed AUS10 stainless steel by our expert knife making partners in Taiwan.  The Model Two _3.5 ^TM includes a two-hand opening 3.5” modified sheepsfoot blade and a full comfortable grip with a strong 4-position stonewashed pocket clip that will make it your go-to large EDC knife. 

The Model Two _3.5 comes super-sharp out of the box with a full flat grind and a secondary beveled edge for strength, ease of sharpening, and years of service.  We’ve included jimping along the spine of the liners under your thumb to improve handling of tough jobs and it is easy to close when putting it back in your pocket.  And since it’s made with quality stainless steel, you won’t need to worry about the edge or blade corroding at the end of the day.

Black G10 scales have been chosen to provide a tough, long-lasting grip that holds up over a day’s work, even when it gets wet.  The ergonomic grip is mounted to the Model Two _3.5 with screws for durability and includes a hole that’s ready for a lanyard or brightly colored length of paracord for improved visibility if you so choose.  Adding a Model Two _3.5 to your EDC items will prove to be one of the wisest long-term choices that you can make.

And if you don’t care for the included black scales or need something more visible, check out our easy-to-change options in a variety of colors, so that you can customize the Model Two _3.5 to your liking!

If you don’t care for slip joint blade but want the same powerful modified sheepsfoot blade, check out our liner-locking FlicKnives Homesteader _3.5 flipper as an alternative!

Model Two _3.5 Specifications:

Blade Length: 3.5" (8.9 cm)

Blade Action: Non-locking slip joint with bronze pivot & strong stainless steel backspring

Closed Length: 5" (12.7 cm)

Overall Length: 8.5" (21.6 cm)

Blade Material: Japanese AUS10 Stainless Steel

Blade Thickness: " ( mm)

Blade Hardness: 58-60

Blade Style: 2-position Modified Sheepsfoot with finger choil with a solid half-stop

Blade Grind: High flat ground blade

Blade Finish: Distressed Tumbled Stonewashed

Pocket Clip: Ambidextrous 4-position Stonewashed stainless steel

Handle Material: Easy-to-swap Black G10

Liners: Stainless steel

Knife Weight:  Oz. ( g)

Packaged Weight:  Oz. ( g)

SKU: SJK3.5SHGM2BLK

UPC: 850066675120

Made in Taiwan

CA Prop 65 Warning: Cancer and Reproductive Harm - www.P65warnings.ca.gov

All SlipjointKnives 3.5 series knives are built using standard black G10 scales. 

For a custom look, SlicKnives offers a variety of popular colors like these blue G10 scales.  They are super-easy to swap out and install using the originally-supplied hardware on any SlipjointKnives 3.5 model knife.

Knives are purchased separately.  This item includes 1 matched pair of blue G10 scales that fit all models of the SlipjointKnives 3.5 series of non-locking folding knives.

Scales Swap Installation Video on YouTube

Scales Swap with Blackout Hardware Kit Installation Video on YouTube

Is thread locker necessary?

All SlipjointKnives 3.5 series knives are built using standard black G10 scales. 

For a custom look, SlicKnives offers a variety of popular colors like these brown G10 scales.  They are super-easy to swap out and install using the originally-supplied hardware on any SlipjointKnives 3.5 model knife.

Knives are purchased separately.  This item includes 1 matched pair of brown G10 scales that fit all models of the SlipjointKnives 3.5 series of non-locking folding knives.

Scales Swap Installation Video on YouTube

Scales Swap with Blackout Hardware Kit Installation Video on YouTube

Is thread locker necessary?

All SlipjointKnives 3.5 series knives are built using standard black G10 scales. 

For a custom look, SlicKnives offers a variety of popular colors like these tan G10 scales.  They are super-easy to swap out and install using the originally-supplied hardware on any SlipjointKnives 3.5 model knife.

Knives are purchased separately.  This item includes 1 matched pair of tan G10 scales that fit all models of the SlipjointKnives 3.5 series of non-locking folding knives.

Scales Swap Installation Video on YouTube

Scales Swap with Blackout Hardware Kit Installation Video on YouTube

Is thread locker necessary?

All SlipjointKnives 3.5 series knives are built using standard black G10 scales. 

For a custom look, SlicKnives offers a variety of popular colors like these gray G10 scales.  They are super-easy to swap out and install using the originally-supplied hardware on any SlipjointKnives 3.5 model knife.

Knives are purchased separately.  This item includes 1 matched pair of gray G10 scales that fit all models of the SlipjointKnives 3.5 series of non-locking folding knives.

Scales Swap Installation Video on YouTube

Scales Swap with Blackout Hardware Kit Installation Video on YouTube

Is thread locker necessary?

All SlipjointKnives 3.5 series knives are built using standard black G10 scales. 

For a custom look, SlicKnives offers a variety of popular colors like these green G10 scales.  They are super-easy to swap out and install using the originally-supplied hardware on any SlipjointKnives 3.5 model knife.

Knives are purchased separately.  This item includes 1 matched pair of green G10 scales that fit all models of the SlipjointKnives 3.5 series of non-locking folding knives.

Scales Swap Installation Video on YouTube

Scales Swap with Blackout Hardware Kit Installation Video on YouTube

Is thread locker necessary?

All SlipjointKnives 3.5 series knives are built using standard black G10 scales. 

For a custom look, SlicKnives offers a variety of popular colors like these orange G10 scales.  They are super-easy to swap out and install using the originally-supplied hardware on any SlipjointKnives 3.5 model knife.

Knives are purchased separately.  This item includes 1 matched pair of orange G10 scales that fit all models of the SlipjointKnives 3.5 series of non-locking folding knives.

Scales Swap Installation Video on YouTube

Scales Swap with Blackout Hardware Kit Installation Video on YouTube

Is thread locker necessary?

All SlipjointKnives 3.5 series knives are built using standard black G10 scales. 

For a custom look, SlicKnives offers a variety of popular colors like these red G10 scales.  They are super-easy to swap out and install using the originally-supplied hardware on any SlipjointKnives 3.5 model knife.

Knives are purchased separately.  This item includes 1 matched pair of red G10 scales that fit all models of the SlipjointKnives 3.5 series of non-locking folding knives.

Scales Swap Installation Video on YouTube

Scales Swap with Blackout Hardware Kit Installation Video on YouTube

Is thread locker necessary?

All SlipjointKnives 3.5 series knives are built using standard black G10 scales. 

For a custom look, SlicKnives offers a variety of popular colors like these yellow G10 scales.  They are super-easy to swap out and install using the originally-supplied hardware on any SlipjointKnives 3.5 model knife.

Knives are purchased separately.  This item includes 1 matched pair of yellow G10 scales that fit all models of the SlipjointKnives 3.5 series of non-locking folding knives.

Scales Swap Installation Video on YouTube

Scales Swap with Blackout Hardware Kit Installation Video on YouTube

Is thread locker necessary?

SlicKnives Blackout Pocket Clip and Hardware Kit fits all FlicKnives 3.5 & SlipjointKnives 3.5 models.  This kit provides a quick and easy way to swap out the original stainless clip and hardware with black hardware for a sleek custom look.

Kit Includes:
1 Matte Black Pocket Clip
2 Pivot Screws
3 Pocket Clip Screws
8 Scale Screws
1 T10 & T6 Tool

Blackout Hardware Kit only
Knife is purchased separately

Blackout Hardware Kit Installation Video on YouTube

Scales Swap with Blackout Hardware Kit Installation Video on YouTube

Is thread locker necessary?

CA Prop 65 Warning: Cancer and Reproductive Harm - www.P65warnings.ca.gov

SlicKnives Stainless Steel Hardware Kit fits all FlicKnives 3.5 & SlipjointKnives 3.5 models.  This kit is a great backup solution if you want to be prepared with extra hardware or happen to have misplaced or lost any of the original screws from your folder during use.

Kit Includes:
2 Pivot Screws
3 Pocket Clip Screws
8 Scale Screws
1 T10 & T6 Tool

Stainless Hardware Kit only
Knife and/or Pocket Clip are purchased separately

Is thread locker necessary?

CA Prop 65 Warning: Cancer and Reproductive Harm - www.P65warnings.ca.gov

SlicKnives Stainless Steel Pocket Clip fits all FlicKnives 3.5 & SlipjointKnives 3.5 models.  This pocket clip is a great backup solution if you want to be prepared should you bend or break one or happen to have misplaced or lost any of the original pocket.

Includes:
1 Distressed and Tumbled Stonewash Finish Stainless Steel Pocket Clip

Stainless Pocket Clip only
Knife and/or Hardware are purchased separately

Is thread locker necessary?

CA Prop 65 Warning: Cancer and Reproductive Harm - www.P65warnings.ca.gov

All SlipjointKnives 3.5 series knives are built using standard black G10 scales. 

For a custom look, SlicKnives offers a variety of popular colors like these OD green micarta scales.  They are super-easy to swap out and install using the originally-supplied hardware on any SlipjointKnives 3.5 model knife.

Knives are purchased separately.  This item includes 1 matched pair of OD green micarta scales that fit all models of the SlipjointKnives 3.5 series of non-locking folding knives.

Scales Swap Installation Video on YouTube

Scales Swap with Blackout Hardware Kit Installation Video on YouTube

Is thread locker necessary?

All SlipjointKnives 3.5 series knives are built using standard black G10 scales. 

For a custom look, SlicKnives offers a variety of popular colors like these black micarta scales.  They are super-easy to swap out and install using the originally-supplied hardware on any SlipjointKnives 3.5 model knife.

Knives are purchased separately.  This item includes 1 matched pair of black micarta scales that fit all models of the SlipjointKnives 3.5 series of non-locking folding knives.

Scales Swap Installation Video on YouTube

Scales Swap with Blackout Hardware Kit Installation Video on YouTube

Is thread locker necessary?

All SlipjointKnives 3.5 series knives are built using standard black G10 scales. 

For a custom look, SlicKnives offers a variety of popular colors like these brown natural micarta scales.  They are super-easy to swap out and install using the originally-supplied hardware on any SlipjointKnives 3.5 model knife.

Knives are purchased separately.  This item includes 1 matched pair of brown natural micarta scales that fit all models of the SlipjointKnives 3.5 series of non-locking folding knives.

Scales Swap Installation Video on YouTube

Scales Swap with Blackout Hardware Kit Installation Video on YouTube

Is thread locker necessary?