FlicKnives

EDC Tool _2.5 Key Features:

• Stonewashed stainless steel keychain tool
• Carry on a keyring or lanyard
• Bottle opener with jimping for added grip
• Flat screwdriver prybar to save your knife tip
• 1/4" hex bit hole - hex bits not included

The SlicKnives EDC plan includes having a keychain or lanyard tool that is set up to quickly handle tasks ensuring that we have a proper prying tool handy.  We always carry a separate tool, so that we’re not tempted to use our knife blades on tasks for which they’re not designed.

SlicKnives has designed our FlicKnives EDC Tool _2.5 ^TM in the U.S. and have them made from tough, quality stonewashed stainless steel by our expert tool making partners based in Taiwan.  The EDC Tool _2.5 comes ready to handle most quick prying tasks with a beveled tip that doubles as a flat screwdriver and helps to save your knife’s edge when you need to open a box.

We’ve included jimping along the edge opposite of the bottle opener for those times when slippery emergencies present themselves after digging through the cooler for just the right beverage.  And we’ve included a ¼” hex bit hole, so that you can choose and carry the proper hex bits to address quick tightening of the screws that impact your daily life.  Hex bits are not included.

Adding an EDC Tool _2.5 to your keychain or lanyard will prove to be one of your best EDC choices ever!

Specifications:

Material: Stainless Steel

Finish: Stonewashed

Length: 2.5" (6.35 cm)

Thickness: 0.12" (3 mm)

Weight: 0.6 Oz. (17 g)

SKU: FKEDCT2.5

UPC: 850066675076

Made in Taiwan

Pocket _3.5 Key Features:

• Tough 3.5" folding & highly corrosion resistant Kephart knife
• Blade made from Japanese AUS-10 stainless steel with ceramic detent
• Slicey distressed tumbled stonewashed drop point high flat ground blade with sharpening choil
• Bronze washer pivot with thumb stud for smooth manual opening
• Large grip with easy-to-swap black G10 scales, stainless steel liners with liner lock & lanyard hole
  
• Tough 4-position pocket clip for ambidextrous carry options 

Due to our fondness of Kephart’s versatile drop point blade design, SlicKnives created folding versions of the blade design in our FlicKnives and SlipjointKnives series, so that we all can carry one every day.  While not made for batoning wood, our spear point folders are built tough and are slicey to help you get your work done. 

SlicKnives has designed our FlicKnives series in the U.S. and have them made from distressed tumbled stonewashed AUS10 stainless steel by our expert knife making partners in Taiwan.  The Pocket _3.5 ^TM includes a smooth one-hand manual opening 3.5” drop point blade with a thumb stud and bronze washer pivot, a solid liner lock, and a full comfortable grip with a strong 4-position stonewashed pocket clip that is a perfect large EDC knife choice. 

The Pocket _3.5 comes super-sharp out of the box with a full flat grind and a secondary beveled edge for strength, ease of sharpening, and years of service.  We’ve included jimping along the spine of the liners under your thumb to improve handling of tough jobs and along the liner lock release for easy one-hand closing.  And since it’s made with quality stainless steel, you won’t need to worry about the edge or blade corroding at the end of the day.

Black G10 scales have been chosen to provide a tough, long-lasting grip that holds up over a day’s work, even when it gets wet.  The ergonomic grip is mounted to the Pocket _3.5 with screws for durability and includes a hole that’s ready for a safety cord or brightly colored length of paracord for improved visibility if you so choose.  Adding a Pocket _3.5 to your EDC items will prove to be one of the wisest long-term choices that you can make.

And if you don’t care for the included black scales, check out our easy-to-change options in a variety of colors, so that you can customize the Pocket _3.5 to your liking!

If you don’t care for thumb stud opening and prefer a flipper in the same drop point blade, check out our FlicKnives EDC _3.5 model an alternative!

Pocket _3.5 Specifications:

Blade Length: 3.5" (8.9 cm)

Blade Action: Thumb stud with bronze washer pivot and liner lock

Closed Length: 5" (12.7 cm)

Overall Length: 8.5" (21.6 cm)

Blade Material: Japanese AUS10 Stainless Steel

Blade Thickness: " ( mm)

Blade Hardness: 

Blade Style: Drop Point with sharpening choil

Blade Grind: High flat ground blade

Blade Finish: Distressed Tumbled Stonewashed

Pocket Clip: Ambidextrous 4-position Stonewashed stainless steel

Handle Material: Easy-to-swap Black G10

Liners: Stainless steel

Knife Weight:  Oz. ( g)

Packaged Weight:  Oz. ( g)

SKU: FK3.5KTPBLK

UPC: 850066675106

Made in Taiwan

EDC _3.5 Key Features:

• Tough 3.5" folding & highly corrosion resistant Kephart profile manual flipper
• Blade made from Japanese AUS-10 stainless steel
• Slicey distressed tumbled stonewashed drop point high flat ground blade with finger choil for finer tasks
• Ceramic ball bearing pivot with flipping tab & ceramic detent for quick manual opening
• Large grip with easy-to-swap black G10 scales, stainless steel liners with liner lock & lanyard hole
  
• Tough 4-position pocket clip for ambidextrous carry options 

Due to our fondness of Kephart’s versatile drop point blade design, SlicKnives created folding versions of the blade design in our FlicKnives series, so that we all can carry one every day.  While not made for batoning wood, our spear point folders are built tough and are slicey to help you get your work done. 

SlicKnives has designed our FlicKnives series in the U.S. and have them made from distressed tumbled stonewashed AUS10 stainless steel by our expert knife making partners in Taiwan.  The EDC _3.5 ^TM includes a smooth manual flipping 3.5” drop point blade and ceramic ball bearing pivot, a solid liner lock, and a full comfortable grip with a strong 4-position stonewashed pocket clip that will make it your go-to large EDC knife. 

The EDC _3.5 comes super-sharp out of the box with a full flat grind and a secondary beveled edge for strength, ease of sharpening, and years of service.  We’ve included jimping along the spine of the liners under your thumb to improve handling of tough jobs and along the liner lock release for easy one-hand closing.  To allow for choking up on the EDC _3.5 for finer tasks, we’ve included a finger choil for proper handling.  And since it’s made with quality stainless steel, you won’t need to worry about the edge or blade corroding at the end of the day.

Black G10 scales have been chosen to provide a tough, long-lasting grip that holds up over a day’s work, even when it gets wet.  The ergonomic grip is mounted to the EDC _3.5 with screws for durability and includes a hole that’s ready for a safety cord or brightly colored length of paracord for improved visibility if you so choose.  Adding an EDC _3.5 to your EDC items will prove to be one of the wisest long-term choices that you can make.

And if you don’t care for the included black scales, check out our easy-to-change options in a variety of colors, so that you can customize the EDC _3.5 to your liking!

If you don’t care for a flipper or finger choil but want the same drop point blade, check out our FlicKnives Pocket _3.5 model that includes a thumb stub as an alternative!

EDC _3.5 Specifications:

Blade Length: 3.5" (8.9 cm)

Blade Action: Manual flipper with ceramic ball bearing pivot, ceramic detent, and liner lock

Closed Length: 5" (12.7 cm)

Overall Length: 8.5" (21.6 cm)

Blade Material: Japanese AUS10 Stainless Steel

Blade Thickness: " ( mm)

Blade Hardness: 

Blade Style: Drop Point with finger choil

Blade Grind: High flat ground blade

Blade Finish: Distressed Tumbled Stonewashed

Pocket Clip: Ambidextrous 4-position Stonewashed stainless steel

Handle Material: Easy-to-swap Black G10

Liners: Stainless steel

Knife Weight:  Oz. ( g)

Packaged Weight:  Oz. ( g)

SKU: FK3.5KFEBLK

UPC: 850066675083

Made in Taiwan

Homesteader _3.5 Key Features:

• Tough 3.5" folding & highly corrosion resistant manual flipper
• Blade made from Japanese AUS-10 stainless steel
• Slicey distressed tumbled stonewashed modified sheepsfoot high flat ground blade with finger choil for finer tasks
• Ceramic ball bearing pivot with flipping tab & ceramic detent for quick manual opening
• Large grip with easy-to-swap black G10 scales, stainless steel liners with liner lock & lanyard hole
  
• Tough 4-position pocket clip for ambidextrous carry options 

SlicKnives absolutely loves basic, single blade designs that everyday people safely rely upon to get their work done, so that they can relax at the end of the day.  If you need a slicey and hard-working locking blade, our FlicKnives series of folding knives are just for you.

SlicKnives has designed our FlicKnives series in the U.S. and have them made from distressed tumbled stonewashed AUS10 stainless steel by our expert knife making partners in Taiwan.  The Homesteader _3.5 ^TM includes a smooth manual flipping 3.5” modified sheepsfoot blade and ceramic ball bearing pivot, a solid liner lock, and a full comfortable grip with a strong 4-position stonewashed pocket clip that will make it your go-to large EDC knife. 

The Homesteader _3.5 is less pokey than other blade profiles and comes super-sharp out of the box with a full flat grind and a secondary beveled edge for strength, ease of sharpening, and years of service.  We’ve included jimping along the spine of the liners under your thumb to improve handling of tough jobs and along the liner lock release for easy one-hand closing.  To allow for choking up on the Homesteader _3.5 for finer tasks, we’ve included a finger choil for proper handling.  And since it’s made with quality stainless steel, you won’t need to worry about the edge or blade corroding at the end of the day.

Black G10 scales have been chosen to provide a tough, long-lasting grip that holds up over a day’s work, even when it gets wet.  The ergonomic grip is mounted to the Homesteader _3.5 with screws for durability and includes a hole that’s ready for a safety cord or brightly colored length of paracord for improved visibility if you so choose.  Adding a Homesteader _3.5 to your EDC items will prove to be one of the wisest long-term choices that you can make.

And if you don’t care for the included black scales or need something more visible, check out our easy-to-change options in a variety of colors, so that you can customize the Homesteader _3.5 to your liking!

If you don’t care for a flipper or finger choil but want the same powerful modified sheepsfoot blade, check out our SlipjointKnives Model Two _3.5 as an alternative!

Homesteader _3.5 Specifications:

Blade Length: 3.5" (8.9 cm)

Blade Action: Manual flipper with ceramic ball bearing pivot, ceramic detent, and liner lock

Closed Length: 5" (12.7 cm)

Overall Length: 8.5" (21.6 cm)

Blade Material: Japanese AUS10 Stainless Steel

Blade Thickness: " ( mm)

Blade Hardness: 

Blade Style: Modified Sheepsfoot with finger choil

Blade Grind: High flat ground blade

Blade Finish: Distressed Tumbled Stonewashed

Pocket Clip: Ambidextrous 4-position Stonewashed stainless steel

Handle Material: Easy-to-swap Black G10

Liners: Stainless steel

Knife Weight:  Oz. ( g)

Packaged Weight:  Oz. ( g)

SKU: FK3.5SHFHBLK

UPC: 850066675090

Made in Taiwan